Sentry Protection Products - Forklift Warning Sensor - CLN-200 Collision Sentry for Blind Spots

Sentry Protection Products
  • SKU LCC-0002495 (CLN-200)
  • Weight 6.00 LBS
  • Height 9.00 (in)
  • Width 6.50 (in)
  • Depth 2.50 (in)
  • Shipping $10.00
  • Stock
  • Brake No
  • Wheel (non-marking) Yes
  • Share This

    Collision Sentry Corner Pro

    Always on Guard


                              Collision Sentry Collision Detection & Avoidance Products 

    Collision Sentry Corner Pro is the collision warning system designed to reduce or eliminate accidents at blind corner intersections. When motion is detected on both sides of the corner, creating conditions for an accident, Collision Sentry Corner Pro sends a visual and audio alert to warn of approaching traffic.

    Collision Sentry Corner Pro is easy to install, self-powered, compact, highly visible and reliable.

    Audio warning

    •  Loud enough to be heard within the corner zone; pitch sets it apart from other background noise
    •  Volume can be adjusted (high/low) or turned off.
    •  Sounds ONLY when motion is detected on both sides of the corner
    •  Synchronized with light flash to reinforce warning

    Visual Warning

    •  Flashes ONLY when motion is detected on both sides of the corner
    •  LED lights angled; increasing light’s intensity and optimizing visibility
    •  Beam focused for best visibility and the concentrated lens increases the intensity


    •  Integrated, recessed magnet mounts snap on to rack for a secure, tight fit
    •  Integrated mounting points for attaching unit to non-magnetic surfaces
    •  Optimal installation height is 7-9 feet


    •  Standard D-cell batteries (included)
    •  Blue light, beeping low battery indicator
    •  Battery life tested to a minimum of 12 months

    Passive infrared motion sensors

    •  Detection zone 20-25 feet in each direction
    •  Alert sent in ample time to take corrective action
    •  Pre-set and ready to use
    Wheel (non-marking):

    provides industrial casters in a range of sizes, options, and safety features. Our casters are available from a variety of brand names to assure you that we can provide the matching replacement caster wheels with the proper size and fit for any of your repair needs. With approximately eight hundred caster wheels coming from 6 different brands, you will easily find the part you are looking for. Our industrial casters come in the most common and uncommon sizes including sizes 3”, 3-1/2”, 4”, and 5”. Locking and non-locking casters are also available for convenience and safety purposes to insure your equipment stays in the specified space. We offer two versions of locking wheel; either top locking or total lock to accommodate your specific preference or need.