Colson Ecoforma Swivel Caster 3-1/2" Grey Rubber (250 LBS Cap) 2.03756.485

SKU cwl-0003639
Weight 2.25 LBS
Height 4.68 (in)
Width 3.50 (in)
Depth 3.00 (in)
Wheel Diameter 2.01 - 3 Inches
Wheel Width 1-1/4 Inches
Overall Height 2 to 4 Inches
Weight Capacity 100 - 299 LBS
Caster Type Swivel
Wheel Material Ecoforma Rubber
Bulk Pricing
  • Buy 50 - 199 and get 5% off
  • Buy 200 - 500 and get 10% off


3-1/2'' x 1-1/4'' EcoForma Swivel Caster with Annular Ball Bearing

Capacity: 250 LBS Each

Wheel Diameter: 3-1/2''

Wheel Width: 1-1/4"

Wheel Material: Thermo-Plastic Elastomer (Ecoforma Rubber)

Fork Finish: Zinc Plated Steel

Bearing Type: Annular Ball

Overall Height: 4-11/16''

Swivel Radius: 2-29/32''


Wheel Diameter:
2.01 - 3 Inches
Wheel Width:
1-1/4 Inches
Overall Height:
2 to 4 Inches
Weight Capacity:
100 - 299 LBS
Caster Type:
Wheel Material:
Ecoforma Rubber
Linco Warranty Each Colson/Encore branded product is warranted against defects in material and workmanship for one year from the date of original purchase, unless it has been misused, abused, modified or improperly installed. Any product that is claimed to be defective that is returned toLinco with its approval will be repaired or replaced free of charge (excluding freight and installation). This warranty is exclusive and there are no other warranties, express or implied, such as an implied warranty of merchantability or fitness for particular purpose. This remedy is the sole remedy in contract, tort or otherwise, and Linco and Colson are not liable for incidental, consequential or special damages.
2.01 - 3 Inches
1-1/4 Inches
2 to 4 Inches
100 - 299 LBS
Ecoforma Rubber

Product Reviews

Score: 5 out of 5 (based on 2 ratings)
leave a review
Colson 3-1/2" Ecoforma Casters
Written by Jeff Johnston on 14th Aug 2019

I love these Colson casters for moving commercial refrigerators around our shop. Four casters per dolly easily handles 1000 lb units. They have lasted 8-10 years without splitting. If I have a negative to add, it would be that the 3-1/2" full lock caster is about 1/8" taller than the non-locking casters. It makes my rolling cart teeter just so slightly. With weight from my tool box added, it's fine.

3-1/2" of Heaven
Written by Tom Ballas on 12th Sep 2012

Such a High Quality product. I am loving them more and more as a replacement from what a had. Very easy to maneuver and install!